Smart Multimeter with Large Color Screen,
How to Use the Bside Smart Large Screen Multimeter (S10/S11)
Step 1: Power On/Off
- Press the power button located on the device to turn it on.
- To turn off the multimeter, press and hold the power button for a few seconds until the screen goes blank.
Step 2: Selecting Measurement Mode
- Use the function switch on the side of the multimeter to select the desired measurement mode (AC voltage, DC voltage, resistance, etc.).
Step 3: Taking Measurements
- Ensure the multimeter is properly connected to the circuit or component you want to measure.
- Refer to the included user manual to identify the correct connections and ranges for your specific measurement.
- Place the multimeter probes on the appropriate points of the circuit/component. The black probe should be connected to the COM (common) terminal, and the red probe to the input terminal.
- Read the measurement value displayed on the large screen.
Step 4: Additional Features
- Use the buttons on the device to navigate between different modes, adjust settings, or access extra functions.
- Refer to the user manual for detailed instructions on utilizing advanced features such as data hold, min/max recording, and backlight controls.
Step 5: Power Off
- After using the multimeter, turn it off by pressing and holding the power button until the screen goes blank.
- Disconnect the probes from the circuit/component.
We hope this guide helps you understand the basic operation of the Bside Smart Large Screen Multimeter (S10/S11). For further assistance, please refer to the included user manual or contact our customer support.
, ,
Reviews
Clear filtersThere are no reviews yet.