[EU/US Direct] TRONXY® D01 3D Printer with Fast Assembly, Ultra-Quiet Mode, Titan Extruder, Acrylic Mask, Optional Power Resume, and Filament Detection,
[HOW TO USE]
Assembly:
- Unbox the TRONXY D01 3D printer.
- Follow the included instruction manual to assemble the printer.
- Ensure all parts are securely attached and tightened.
Powering On:
- Connect the power cord to the printer and plug it into a power source.
- Turn on the power switch found on the printer.
Preparing the Filament:
- Load the filament spool onto the filament holder.
- Insert the filament into the Titan extruder by following the extruder’s instructions.
- Ensure that the filament is properly inserted and securely held by the extruder.
Preparing the Print Surface:
- Ensure the print surface is clean and free from any debris or residue.
- Apply a suitable adhesive, such as glue stick or painter’s tape, to the print surface to aid in adhesion.
Leveling the Bed:
- Access the bed leveling menu on the printer’s LCD screen.
- Follow the on-screen instructions to level the bed using the manual bed leveling knobs.
- Ensure the bed is leveled properly to achieve optimal print quality.
Starting a Print:
- Transfer the desired 3D model file to the printer via USB or SD card.
- Select the file from the printer’s menu and adjust the print settings if necessary.
- Confirm the print settings and start the print job.
Monitoring the Print:
- Observe the progress of the print job on the printer’s LCD screen or through the connected software.
- Ensure there are no errors or issues during the printing process.
Finishing the Print:
- Allow the print to cool down completely before removing it from the print surface.
- Gently remove the print from the surface to avoid damage.
- Inspect the print for any defects or imperfections.
Cleaning and Maintenance:
- Regularly clean the print surface to remove any leftover filament or debris.
- Check and tighten all connections and screws to ensure the printer is in proper working condition.
- Refer to the instruction manual for any specific maintenance requirements.
, , TRONXY
Reviews
Clear filtersThere are no reviews yet.