10mm Safety Valve for Pressure Cookers

10mm Safety Valve for Pressure Cookers,

[HOW TO USE]

Step 1: Prepare the Pressure Cooker

• Make sure your pressure cooker has an inner diameter of 10mm.
• Ensure that the pressure cooker is clean and in good working condition.

Step 2: Install the Safety Valve

1. Locate the deflation valve on your pressure cooker.
2. Remove any existing valve from the pressure cooker, if necessary.
3. Take the Pressure Cooker Safety Valve Relief Valve Deflation Valve Accessory.
4. Insert the valve into the 10mm inner diameter of your pressure cooker properly.
5. Ensure that it fits securely and is tightly fastened.

Step 3: Verify Installation

• Double-check that the safety valve is properly installed and locked into place.
• Ensure that there are no leaks or gaps between the valve and the pressure cooker.

Step 4: Start Cooking

• Follow the instructions of your recipe or pressure cooker manual for cooking.
• Make sure to properly handle and operate the pressure cooker at all times.
• Do not touch the safety valve during or after cooking, as it may be hot.

Step 5: Cleaning and Maintenance

• After each use, clean the safety valve and the pressure cooker according to the manufacturer’s instructions.
• Regularly inspect the valve for any signs of damage or wear.
• Replace the safety valve if it is damaged or not functioning properly.

, ,